containerhome2.jpg

Container House In The Woods

How about a stain you can create with ingredients from your own kitchen And hey, it really, really works. Take a look at the color difference in these two picture frames. This is made of pine. It’s been untreated. And this one has been stained with a stain that you can make, well, right out of your own kitchen with some really basic ingredients. Let me show you how to do it because it’s all natural and, well, the results, as you can see, are really pretty nice. What you wanna start with is a quart jar. This will contain the stain.

And it’s a simple as taking 12 a cup of coffee grounds. And these are grounds that you’ve already used. You don’t want it to smell like coffee. And then you’re going to take a steel wool pad. And I’m gonna cut this into pieces, just small pieces like this. There’s one, two Oh, and if you buy steel wool, if it has soap in it like this, you wanna make sure you rinse all the soap out first. Next, what you’re gonna do is take the pieces of steel wool and just drop them into the jar like this. You see, what you’re doing is you’re.

Creating a chemical reaction that comes up with a color, which I think has a nice, natural look to it. Now this is all activated by vinegar. I’m just using white vinegar. You could use balsamic, but it means your stain is gonna be slightly greener in color. So what you do is you just take this white vinegar and you fill up a quart jar all the way to the top with those ingredients like this. And seal it off, and you’re gonna wait one day. Now, if you wait two days, you’re stain is gonna be slightly darker. So this has been.

DIY AllNatural Wood Stain At Home With P. Allen Smith

Soaking for one day. You can see, my steal wool is beginning to dissolve. Then you wanna take it and apply it with the steel wool like this across the plane of wood, making sure that it’s fully saturated. This technique comes in really handy if you have to replace, say, a fence panel on your privacy fence or maybe boards on your deck where they’ve weathered this nice, silvery gray like this table has. You put a new board on their and you want it to match the others, rather than having to replace all the boards, you can do it and.

Get this color so it looks like it just fits right in and you can’t tell that it’s been replaced. Now, once you coat this, you’re gonna let this dry. And once it’s dry, you’ll probably wanna apply another coat on it. It takes about 30 minutes for the chemical reaction to occur and then this is the sort of look you get. So have a little fun with this. It’s easy to make and very effective. And allnatural. If you’re enjoying these segments on how to come up with clever ways to use just ordinary home products and come up with something exceptional,.

containerhome2.jpg Category: How to Build a Container Home

Leave a Reply